In short
Podcast Summary: Stuff You Should Know - How Styrofoam Works
Episode Overview In this episode of *Stuff You Should Know*, hosts Josh and Chuck dive into the science, history, and environmental impacts of Styrofoam. They clarify misconceptions around Styrofoam and discuss its chemical properties, production processes, and the issues associated with its widespread use.
Key Concepts
Styrofoam vs. Polystyrene
- Styrofoam: A brand name for extruded polystyrene (XPS), primarily used for insulation.
- Expanded Polystyrene (EPS): Commonly referred to as Styrofoam, used in cups and food containers. It is not biodegradable and poses significant environmental challenges.
Historical Background
- Styrene was first distilled from plants in 1839 by Eduard Simon.
- The commercial production of Styrofoam began in the 1930s, largely influenced by military applications during World War II.
Production Process
- Styrene Creation: Derived from petroleum products (benzene and ethylene).
- Polystyrene Formation: Styrene monomers connect to form polymers, which can be processed into XPS or EPS through different methods.
- XPS is produced under high pressure, resulting in a dense material.
- EPS involves heating polystyrene pellets with steam, causing them to expand and form lightweight foam.
Applications
- Styrofoam is widely used in various industries including food service, packaging, and construction due to its insulating and lightweight properties.
- Examples include coffee cups, takeout containers, and insulation boards.
Health Risks
- Exposure to Styrene is associated with health risks, including neurotoxicity and potential carcinogenic effects.
- Concerns are heightened for workers in manufacturing environments where styrene exposure is more likely.
Environmental Impacts
Pollution Categories
- Air Pollution: Production emits harmful gases, including HFCs which are potent greenhouse gases.
- Marine Life Threats: Styrofoam products can break down into small particles, ingested by marine animals, leading to ecological harm.
- Solid Waste: As a non-biodegradable material, Styrofoam can persist for centuries in landfills, contributing to long-term waste management issues.
Recycling Challenges
- Difficulties in recycling due to bulkiness, contamination, and low economic incentives for companies to recycle Styrofoam.
- Innovative methods, such as using microbes for degradation, are being researched but are not yet scalable.
Corporate and Legislative Responses
- Various states and municipalities have enacted bans on Styrofoam, but enforcement can be a challenge due to lobbying from companies like Dart Container Corporation.
- The episode discusses the controversial approaches taken by corporations to resist bans and maintain market presence.
Conclusion The episode concludes with a discussion on the need to reconsider our reliance on Styrofoam and the importance of exploring sustainable alternatives as well as the potential for more effective recycling methods.
Key Takeaways
- Styrofoam is an integral but problematic material.
- Awareness of health risks and environmental impacts is crucial.
- Efforts to reduce Styrofoam use and improve recycling methods are ongoing, but face significant challenges from industry pressure.
Listener Engagement
- The episode wraps up with a listener mail segment, discussing pop culture references related to Styrofoam and its nostalgic value, especially for those who grew up in the 80s.
---
This summary captures the essence of the podcast episode while highlighting key discussions around the science and implications of Styrofoam use.
Written by AI. May contain mistakes. Listen to the episode to check what was said.
Transcript
Automatic transcript. May contain errors.0:00This is an iHeart Podcast. Guaranteed Human.
0:31app, Apple Podcasts, or wherever you get your podcasts.
1:01John Polk story on the iHeartRadio app, Apple Podcasts, or wherever you get your podcasts. Welcome to Stuff You Should Know, a production of iHeartRadio.
1:19Hey, and welcome to the podcast. I'm Josh, and there's Chuck, and Jerry's here too, and this is a good old-fashioned, rootin' tootin', wholesome, down-home hour of fellowship with Stuff You Should Know. Wow. You sound like the coolest youth director in the building. You nailed it, Chuck. You totally nailed it. That's right. I'm also the only youth director in the building right now. That's right. I had to hang up my spurs. Yeah. You got run out on a rail, didn't you? They were like, if there's one thing that's certainly not cool, this youth director's in their 50s, so you're out. Right. I'm still in my 40s, so it's kind of like David Bowie said, don't trust any youth director over 50.
2:02That's right. You know, he also sung about Styrofoam. No, he didn't. No, I just thought I could get you. No, I could see it. I mean, like it was when Bowie was Bowie, it was Styrofoam was still this amazing wonder product. But I got to say, Chuck, I feel like in the last decade or so, maybe it started to get kind of a bad name. I think you're right. And we're going to, I mean, we're going to talk about the science of it all, how it's made, and clear up some misconceptions and reinforce some conceptions. But the first thing we should probably clear up, and big thanks to Olivia, by the way, she knocked another one out of the park, is that Styrofoam is a brand name.
2:47And Olivia is keen to point out that it's not just like, you know, Band-Aid or Kleenex. Like this one actually matters because the styrofoam that you and I think of and most people probably think of is like, you know, what to go container or old school coffee cup or to go coffee cup might be. Yeah. That's actually not styrofoam. That's technically something called EPS, expanded polystyrene, whereas the brand name styrofoam is extruded polystyrene. And that's mainly just like used for insulation and, you know, cut into big boards and stuff like that. Right. And you're like, well, what's the big deal?
3:30They're actually basically exactly the same products. They have slightly different properties, but it's all the same raw materials, very similar production processes. And the final product is, for all intents and purposes, the same. The big difference is the styrofoam is used for years and years and years and years. Like once you put it in to insulate a radiant heat floor, you're not going to tear that up after a couple of days and throw it in the dump. With the other stuff that expanded polystyrene, the stuff we think of as styrofoam, that's the stuff we use once for a few minutes and just throw away and get another new one.
4:09And that's posing a bigger and bigger problem as time goes on. That's right. Unless you're at my house, then Emily collects every bit of styrofoam and drives it to the specific styrofoam place. Charm? Yeah, which still may not be recycling it. Oh, no, really? Oh, I don't know. I mean, I think Charm does the right thing, but I don't know. I just think so much of that stuff is dubious once you drop it off. Like, who knows what even happens to it? And I don't mean that in a conspiracy-minded way. I just mean that, as we'll see, recycling Styrofoam, there's just not a lot of reason to do it if you're Styrofoam people because you can just make it, again, so cheaply.
4:47It's true. Sad? Yeah, it is sad for sure. And for those of you outside of the Atlanta area, CHARM is the one recycling center in the entire metro Atlanta area where you can take Styrofoam. It stands for the Center for Hard-to-Recycle Materials. Yeah. I mean, God bless Emily for doing all that because I certainly wouldn't. I know. It's a haul. It's not really conveniently. No. Neither is saving tons and tons of Styrofoam to go to CHARM once a month or whatever. But she does it. So, you know, she does the right thing. So let's talk about all this stuff because I find it pretty fascinating. There's some science involved.
5:25There's some environmentalism involved. There's some corporate tomfoolery involved. I'm excited about this one. Well, I'm glad. Good. Well, I'm going to kick it off because styrofoam, well, let's start. We're talking about polystyrene. And polystyrene is a form of styrene. And styrene occurs naturally in a lot of different plants. It's just kind of part of the ecosystem. But it was first distilled out in, I think, 1839 by a German pharmacist. I'm going with Eduard Simmon in German. You know, I don't know. Simone? That sounds French. Yeah, that doesn't sound very German. I mean, just call him Eddie Simon.
6:08Eddie Simon in 1839. He was a pharmacist who got his hands on a sweet gum tree from America, which was probably very exotic in Germany at the time. and he got styrene out of there. And he figured out how to take styrene molecules, which are a monomer, and put a bunch of them together to make a polymer. And what he got was a rigid plastic solid. What we're talking about is a type of plastic. And he's like, I can't do anything with this and just moved along. Yeah, and it stayed that way for close to 100 years, like 90 years or so. And finally in the 1930s, again, a lot of stuff comes about because they're trying to figure out some sort of military use for something.
6:48And that was the case here. As we were, you know, between wars, the military was like, hey, how can we use this stuff? The literal brand name Styrofoam, which again is the XPS, the stuff that's, you know, used in radiant flooring and like wall insulation and stuff like that. That was invented a couple of times. The first time by a Swedish inventor named Carl Munters, who developed it in the 30s, but again, didn't have a lot of practical use for it. And then Dow came along, the Dow Chemical Company during World War II, and they had an engineer named Ray McIntyre who said, I'm looking to try and get a synthetic, or I guess he was charged with trying to develop a synthetic substitute for rubber.
7:32Yeah, he was facing five years for it. Yeah, to use as a flexible insulator. And he combined styrene with isobutylene. And what he got was something he didn't expect, which was this very airy, the isobutylene formed bubbles in the styrene. So it was, you know, what we think of as styrofoam, the super light, very airy, very insulating, water resistant, flexible material. Yeah. So imagine taking something like imagine taking a CD jewel case because that's polystyrene and chopping it up into little tiny pellets. And then you're messing around with it and adding isobutylene. And all of a sudden those pellets turn into little foamy balls.
8:12The exact same thing that if you have a very lightweight beanbag chair, it's full of those. It's polystyrene foam. That's the that's the basis of the whole thing. Right. These little tiny pellets. And he must have just been as surprised as the day is long. Yeah. Well, Dow was certainly surprised and delighted. And they were like, hey, let's just start manufacturing this stuff. We got plenty of things we can do. And somebody said, wait a minute. There's this other guy named Carl Munters who already developed, you know, and has patented this concept. And Dow said, great, let's just write him, cut him a check.
8:46And now we can patent capital S styrofoam. And they did so. And they started saying, hey, you know, we can build like floating docks out of this stuff. And there's all sorts of marine uses, basically, because it floats really well. Yeah, because that extruded polystyrene, the actual styrofoam brand type, that is very water resistant. It's extremely lightweight. It's very buoyant. So it just automatically made sense to apply it to different like water-based situations, right? Yeah, for sure. As far as the stuff that we think of as styrofoam, around the same time in the 1930s, a German company called IP Farben, who I know we've talked about them before several times.
9:26They're the ones who created the gas that was used in the gas chambers. Ah, OK. They've come up a time or two. They don't have a great reputation these days. No, I know we definitely talked about them a few times, but they were developing the EPS, the polystyrene foam, the stuff, again, that we think of as styrofoam, like, you know, the cups and the to-go containers and all that stuff. And both sides in World War II started saying, hey, this stuff is super light and super insulating. It works good as a shock absorber. We can use it in various parts to make them lighter. So let's get going with it.
10:02Yeah. The thing is, I guess it's part of the extrusion process. It essentially is only made in board form, long, thinnish boards, right? Kind of like it looks like drywall, but it's foam. If you've ever been to a do-it-yourself hardware store and they have like big, big rectangles of foam, that is styrofoam. It might not be styrofoam brand, but it's that exact same thing, right? And there's not that many uses to it, but the stuff it does do, like block out heat, insulate is another word for it. It does really, really well, right? So the XPS has like some limited applications. The EPS, the stuff we think of, like the styrofoam cups and all that stuff, that has like limitless applications because you can take that stuff as part of the production process.
11:00and push it into a mold and mold it into any shape you want. And they definitely did that in the post-war era of prosperous, better living through chemistry. Styrofoam was a big star of that at first. Yeah. And, you know, you can probably name any sort of insulation application that it was used for. Everything from, you know, ice cream containers, like, you know, when you go to taste all the ice cream and then finally settle on one. Those big coolers, those are lined with thick styrofoam. They used them for Christmas ornaments because they were super light and won't weigh down a tree. All kinds, again, of marine applications, you know, buoys, floating docks, in boats.
11:47Again, you can mold it however you want. But, you know, the styrofoam coolers that, you know, you pick up at the gas station because you just have a hankering for cold beer and you're on the road. You want to drink and drive? Smart. Just kidding. But those that you see in the convenience store, those started popping up in the 1950s. But we didn't see the cups until the 1960s, right? Yeah. Apparently, Chick-fil-A was one of the first restaurants to adopt styrofoam cups for to-go stuff, right? Right. That was in 1960, I think. Yeah, right on the nose from what, the Dart Manufacturing Company of Michigan?
12:26Yeah. So Dart Manufacturing got into this and they got into it so heavy that they actually ended up changing their name to Dart Container Corporation. They're one of the leading companies or leading producers of what you would consider styrofoam containers. Yeah. Yeah. So they were the ones that started producing this, started kind of getting it out there like, hey, you know how you don't like your customers sitting around taking an hour and a half to drink their Coke? Yeah. Buy one of our Styrofoam cups. They'll just get right out of your hair and somebody else can come in and patronize your restaurant.
12:56Right. So it caught on pretty quick. I think 7-Eleven was the first chain to actually start using Styrofoam cups for coffee, which, as we'll see, was a bad idea right out of the gate. Yeah. And by the 70s, it was like anywhere you went and got coffee, it came in a white. And again, I'm sorry, I realize I keep using the word styrofoam. You couldn't do any different than I am right now trying to talk about this. It's impossible. But they that just became the standard for this whole thing, like a styrofoam cup. That's what your coffee came in until Starbucks came along. Yeah, I mean, for decades, basically.
13:35And then Starbucks did lead the charge to sort of, you know, get rid of that. And then, you know, a bunch of people followed suit, thankfully. But, you know, when fast food came along and takeout food got more popular, obviously that's going to grow, grow, grow the styrofoam business. I'm very glad Livia included this because I would have if she wouldn't have, and you probably would have too. But if you grew up a kid in the 80s, then you remember the McDonald's McDLT, Yep. If you don't remember, I think we've mentioned it before, but it was the idea was they're like, hey, no one wants all this hot droopy lettuce and steamy tomatoes on their hamburgers.
14:13They want that stuff to be cold and they want their burger to be hot. And they want to do it like you do at home is you add that stuff right before you put it in your mouth for the right mixture. And that's what the McDLT was. It was not only an offending styrofoam container, but it was a double because you had one side that had it keeps the hot stuff hot. and the coolest side cool. That's right. And none other than Seinfeld's own Jason Alexander sang and danced in a TV commercial in the 80s extolling the virtues of the McDLT container itself. Yeah, wearing a skinny tie. I think he's wearing a blazer with the sleeves rolled up even maybe.
14:49Probably pushed up. Like he stinks of 1985. Yeah. The thing about the McDLT container, and yeah, if you don't know what we're talking about, just go look it up. Once you took the top off, You could actually close the bottoms together and put your sandwich together like that using your styrofoam container. Oh, really? For those who were really good at it, yeah. See, I don't know. I never ate that because that wasn't my jam, but it seemed like it would just kind of not do a very great job of that. Yeah, no, a McDLT never passed my lips either because of the L and the T. But I have to say, one of the things that makes me really nostalgic from my childhood is looking at old Styrofoam McDonald's containers.
15:34Yeah. It's hard not to just see that yellow container with all the M's all over it. Yeah. And not pying for it, but just, you know, just like nostalgia does. Definitely takes you back. What knocked me out is, as we'll see, it wasn't until 1990 that they stopped using those things. Yeah. And we'll get to, you know, how it's been sort of weeded out here and there. But it's still a booming industry. I think last year worldwide, there were 15.2 million total tons of polystyrene produced. And about 60 percent of that is in the Asia Pacific region. Apparently, it's a growing thing, but it's growing much slower in Europe and North America than it is in industrializing areas around the world.
16:18Right. Most of it goes in the packing industry. I think a third of it is used by packaging industry. Those packing peanuts were invented by a guy named Robert E. Holden back in 1965. Household Appliances uses another quarter of it. I didn't understand that. I think some of it is packing materials. You know, you have to pull all those boards of styrofoam out of your new refrigerator. Yeah, I think it's also in some of the units, like in a washer. Aren't there like big chunks of styrofoam? Is it just like air? Yeah. Take up airspace? I think that's part of it. And then also like in that same fridge, there's like around the dials and controls, they'll use some for insulation.
16:59They don't actually insulate the fridge with it because you can't create an airtight seal between two boards. But they do use it in other places in the fridge where you don't need an airtight seal. Well, I think this is off to a capital start. Shall we take a break and let you take over? Sure. I think that's a capital idea. All right. We'll be right back.
17:34New year, new goals, and in this economy, a better money plan is more necessary than ever. I am Matt. And I'm Joel. We are from the How to Money podcast, and every week we help you to spend smarter, save more, and make sense of what's going on out there. If you want 2026 to be the year you finally feel in control of your money, we're here to give you the tools and advice to help you make it happen. Listen to How to Money on the iHeartRadio app, Apple Podcasts, or wherever you get your podcasts. Hi, I'm Dr. Priyanka Wally. And I'm Hari Kondabolu. It's a new year, and on the podcast Health Stuff, we're resetting the way we talk about our health.
18:09Which means being honest about what we know, what we don't know, and how messy it can all be. I like to sleep in late and sleep early. Is there a chronotype for that or am I just depressed? We talk to experts who share real experiences and insight. You just really need to find where it is that you can have an impact in your own life and just start doing that. We break down the topics you want to know more about. Sleep, stress, mental health, and how the world around us affects our overall health. We talk about all the ways to keep your body and mind, inside and out, healthy. We human beings, all we want is connection.
18:48We just want to connect with each other. Health stuff is about learning, laughing, and feeling a little less alone. Listen on the iHeartRadio app, Apple Podcasts, or wherever you get your podcasts. Hey there, this is Dr. Jesse Mills, director of the Men's Clinic at UCLA Health and host of the Mailroom Podcast. Each January, guys everywhere make the same resolutions. Get stronger, work harder, fix what's broken. But what if the real work isn't physical at all? To kick off the new year, I sat down with Dr. Steve Poulter, a psychologist with over 30 years experience helping men unpack shame, anxiety, and emotional pain they were never taught to name.
19:26In a powerful two-part conversation, we discuss why men aren't emotionally bulletproof, why shame hides in plain sight, and how real strength comes from listening to yourself and to others. Guys who are toxic, they're immature, or they've got something they just haven't resolved. Once that gets resolved, then there comes empathy as in compassion. If you want this to be the year you stop powering through pain and start understanding what's underneath, listen to The Mailroom on the iHeartRadio app, Apple Podcasts, or wherever you get your favorite shows.
20:10Okay, Chuck, so we're back, and you said that I would be taking over, and since I'm taking over, I'm in charge, and I'm delegating it to you. I can start this part, but you know when to come in, because it's part of, you know, it's chemistry. And that's famously the only class I ever failed. I'm just fascinated by it. So, yeah, this works out just perfectly. That's great. If we're talking about styrene today, another name for it is vinyl benzene because it is a vinyl, as we'll see. It does not come from a plant like Eddie Simon used back in Germany in the 1830s. The modern process starts with, you know, it comes from petroleum products these days and specifically a couple called benzene and ethylene.
20:52They're combined with a catalyst called aluminum chloride to eventually produce ethylbenzene. You get that in a gas state, process it at a high temperature with another catalyst. It's a process called dehydrogenating. And finally, you have your styrene. Yes. Styrene is C8H8. Lots of carbon, lots of hydrogen together. Yeah. And in that styrene molecule, there are carbon atoms that have a double bond between them, right? Which means that they can share one. So when you take styrene, a monomer, and put a bunch of them together to create a polymer, one of those double bonds kind of opens up and connects to another one and another one and another one.
21:34It forms a carbon chain, right? But if you look at the, I don't know what it's called, but like the chemical drawing, you know, of like the molecule with the lines and the C's and the H's and everything. Yeah, I feel like in most movies that's rendered 3D so you can zoom it around and stuff. Right. This is more like the written out shorthand that I'm talking about. I know what you're talking about. Yeah. I don't know what mine's called, but whatever that is for the polystyrene, if you look at it, it's a nice little carbon chain. but then there's these like medallions dangling off of them. Those are called phenol groups.
22:08And because of those things, the polymers can't form a really nice crystalline structure. Right. Which means that it's see-through. It's not particularly thick. It's brittle, so it can break. And it's not flexible very much, right? And I was like, well, wait a minute. Crystal, you think about, is already see-through. But as far as chemistry goes, the more crystalline a structure is, the tighter the whole thing is put together. So the thicker and less see-through it is. So like steel has a very crystalline structure, even though, you know, I think rose quartz when I think of a crystalline structure, but that's wrong, wrong, wrong.
22:46Yeah. See, that's why I'm not good at chemistry. It's not very intuitive, is it? No, but I mean, this is pretty late in life. It's not like I was a chemistry whiz in high school. I'm not even sure if I took a chemistry class in high school. Oh, yeah? Yeah, I got out of a lot of stuff. Never took trig. How'd you get out of that stuff? I had my ways. Oh, okay. I wouldn't ask any further. So again, if you take the stuff, this polystyrene, you don't have anything that even resembles a foam cup. You have like what looks like a bunch of pellets that if you mash together, you would, again, create a CD jewel case because that's exactly what they do to create those.
23:24You have to go add a couple extra steps to create polystyrene foam. Yeah, exactly. And, you know, we said that that stuff was prone to cracking and very breakable. If you came about in the CD jewel case era, Red Solo Cups, too, are also the same thing. But, you know, those CD jewel cases, if you had one long enough, it's going to have a crack in it. Oh, yeah. And then you had to throw out the entire thing. No, no, no, no. It's almost a badge of honor. Like, look how long I've had this thing. You can't even see through it anymore. It's cracked all over the place. You can't even see Billy Joel's face.
23:57Right. By the way, well, I think we'll just follow up with the Billy Joel listener mail, but he announced he has a medical condition and he's canceling his tour for now. So it was very sad to see. Oh, man. What did you do, Chuck? Kind of right after we talked about him. I know. Jinx? Hopefully he'll be okay, though. But anyway. I'm sure he will be. So these XPS boards that we keep talking about, the capital S styrofoam that's used in insulation and stuff like that, how they make that is they melt those little beads that you were talking about those little granules add chemicals one of which is a blowing agent and then they force that thing through a die as in a die as in like die cast metal right thing right and then they're constantly pushing that stuff through and it's melting it and pressing it together and that final product those boards of polystyrene are really smooth.
24:49They're really thick. They're not very, they just look really uniform. And the reason why is because all of those cells, all those polystyrene foam pellets that you use in a beanbag chair, they get pressed together so tightly with so much pressure and heat that there's no space between them basically. Okay. With expanded polystyrene, the stuff that you make cups and containers out of. It's slightly different. You take those same pellets, and like you said, there's a blowing agent in there. Both kinds have a blowing agent, but they use different ones. And the blowing agent is this kind of gas that is put into, in little tiny bubbles, into the little polystyrene foam pellets.
25:32That's what makes it foamy. But if you take those same pellets and you expose them to steam, they swell up because that blowing agent suddenly boils and vaporizes at very low temperatures. And the pellets expand to like 40 times their size and they melt together very easily. And what you have now is essentially the raw material for expanded polystyrene. That's why they call it expanded, which you can make everything from a coffee cup to a vintage Santa Claus door ornament face. Yeah, exactly. Do you I mean, that's another nostalgic thing. I think you can get them still on like eBay. There's a lot of nostalgia around styrofoam if you kind of really think about it, if you're a Gen Xer.
Read the full transcript
26:20But that, I mean, that goes to show just how, what a huge part it was of 20th century life. It really was. Yeah, for sure. So we mentioned, you know, those boards are really great at insulating, which is why they use it in like siding sometimes and stuff like that or in ice cream coolers. One reason is because it is water resistant. If you have an insulating material that has moisture in it, that's no good because water conducts heat really well. So that's one good thing. But they do degrade over time. The board, you know, that blowing agent will leak out of those cells a little bit over time.
26:55So it's a little less insulating. And while it is water resistant, it's not completely water resistant. So when it does not resist a little bit of water, it has a really, aka absorption, it has a really hard time getting rid of it again. So that just kind of knocks it down over time. But even considering depletion, it still has a really good thermal resistance and is still a really good insulator. Yeah, it's like twice as good, I guess, than that rollout insulation that you can buy. Yeah, and I don't think we mentioned early on, you know, they used to put like foot-thick cork walls in like industrial refrigerators and stuff.
27:35And they could get that down to like two inches of styrofoam. So it was really useful. I don't know if we said this, too. It's like really, really cheap to manufacture as well. Yeah, super cheap. And so it sounds like just this wonder product that's everything about it is great. But here's where it goes dark. Here's where the VH1 behind the music is probably like 35, 40 minutes into the VH1. Right before the commercial break, they'll say, and that's when things got dark. Because, of course, styrene is dangerous. if you're just talking about health problems, central nervous system problems, headaches, depression, fatigue.
28:13Obviously, if you're breathing this stuff in, it's no good. It's no good for your skin and your eyes. And you might think, well, what's the big deal? Because we're not breathing that stuff in. But if you work at one of these places that manufacturers it, you totally are. Yeah. And they've followed people who work in styrene plants and found that The neurotoxicity makes them kind of dull and a little dippy, kind of like you're drunk and your reaction times are slower. And we're talking styrene itself, the monomer that's the basis of polystyrene foam, right? It's been shown to cause birth defects, reproductive defects, cancer.
28:49Like you said, it's a bad jam. Polystyrene seems to be not nearly as dangerous. The problem is the way that we make polystyrene, there's still styrene that can break off essentially from the polymer and float around and get into your body. And that's no good. Yeah, I think they've since the mid 80s, they've found styrene in samples of human fat tissue. Of course, the public health organizations are saying like they do with everything like that, like, oh, it's not enough to really worry about it. everyone's got a little styrene in their fat. Don't sweat it. But in 2018, it was bad enough as a potential carcinogen that the World Health Organization raised it from possible carcinogen to probable carcinogen.
29:43And I imagine it won't be long until they're just like, can we all just admit it's a carcinogen? Yeah, I'm sure that the polystyrene companies are fighting that last one tooth and nail. Yeah. So we should say that most of the studies that have shown like styrene is bad for you. Like we said, looked at workers who work around styrene and we don't work around styrene. We're just podcasters. You probably don't work around styrene either. So like you said, it's not like they're not clutching their pearls over this or whatever, but it does seem like this thing where the more that we look at it, the more problems we find from it.
30:19And the more we come to understand that actually there's probably more exposure to styrene than we thought. Like if you look across the board, everyone will tell you, anyone who knows anything about polystyrene, I should say, will say, do not microwave your polystyrene to-go container. Yeah. Ever, never. Just don't ever do it because they found that that polystyrene can leach styrene into your food and you eat that stuff. You don't want to do that. And there's even types of containers, polystyrene containers that have like three little wavy lines and says microwave safe or microwavable or something like that.
30:59And those supposedly you can microwave your food with. No, because what that refers to is the container will survive it. It has nothing to do with whether or not there's going to be chemicals leaching into your food. They're just saying this container won't melt in your microwave. That's it. So never, ever, ever do that. Just take the extra step of dumping it onto a plate for Pete's sake. Yeah, for sure. And, you know, especially hot things, especially acidic things like, oh, I don't know, hot coffee. They found that, you know, that stuff can leach into your body as styrene. Yeah, I think they said that it starts leaching out at about 104 degrees Fahrenheit, 40 degrees Celsius.
31:41Not that hot. Yeah, and it's used specifically to keep liquids and foods hot. I guess or cold, but, you know, but hot is the problem. Yeah. Yeah, I think it still can leach out when it's even cool or room temperature, but heat is where it really starts to jack up. Yeah. So, hey, if you get a salad and it's in one of those stupid things, put that in a nice ceramic bowl as well. Put it in a solo cup. No. There's a bunch of other impacts that it has, specifically environmentally. Should we break? Are we going to break? I feel like that's a third act sort of thing. Okay. Well, man, I'm glad you caught me because I was about to take off.
32:23All right. You're grounded. We'll be right back.
32:39New year, new goals, and in this economy, a better money plan is more necessary than ever. I am Matt and I'm Joel. We are from the How to Money podcast and every week we help you to spend smarter, save more and make sense of what's going on out there. If you want 2026 to be the year you finally feel in control of your money, we're here to give you the tools and advice to help you make it happen. Listen to How to Money on the iHeartRadio app, Apple Podcasts or wherever you get your podcasts. Hi, I'm Dr. Priyanka Wally. And I'm Hurricane Dabolu. It's a new year and on the podcast Health Stuff, we're resetting the way we talk about our health.
33:14Which means being honest about what we know, what we don't know, and how messy it can all be. I like to sleep in late and sleep early. Is there a chronotype for that or am I just depressed? We talk to experts who share real experiences and insight. You just really need to find where it is that you can have an impact in your own life and just start doing that. We break down the topics you want to know more about. Sleep, stress, mental health, and how the world around us affects our overall health. We talk about all the ways to keep your body and mind, inside and out, healthy. We human beings, all we want is connection.
33:53We just want to connect with each other. Health stuff is about learning, laughing, and feeling a little less alone. Listen on the iHeartRadio app, Apple Podcasts, or wherever you get your podcasts. Hey there, this is Dr. Jesse Mills, director of the Men's Clinic at UCLA Health and host of the Mailroom Podcast. Each January, guys everywhere make the same resolutions. Get stronger, work harder, fix what's broken. But what if the real work isn't physical at all? To kick off the new year, I sat down with Dr. Steve Poulter, a psychologist with over 30 years experience helping men unpack shame, anxiety, and emotional pain they were never taught to name.
34:32In a powerful two-part conversation, we discuss why men aren't emotionally bulletproof, why shame hides in plain sight, and how real strength comes from listening to yourself and to others. Guys who are toxic, they're immature, or they've got something they just haven't resolved. Once that gets resolved, then there comes empathy as in compassion. If you want this to be the year you stop powering through pain and start understanding what's underneath, listen to The Mailroom on the iHeartRadio app, Apple Podcasts, or wherever you get your favorite shows.
35:15All right. Since I rudely cut Josh off when he was trying to talk about, or Joff. That's a good new name. G-E-O-F-F? Your favorite spelling of Jeff? Yeah. But you have to say it like Joff. If you're going to go to the trouble of spelling Jeff like Joff, you should say Joff. Anyway, I cut off Joff when he started to get hot on the environment. And so I'm going to let you take it away because the environmental disaster is basically into three categories, right? Yeah. Air pollution, threats to marine life, and then solid waste. Those are the big three environmental impacts we found that it poses.
35:54Yeah, the air pollution, you might be thinking like, well, I don't get it. Like, it's just blowing into the air. It's in the manufacturing process. Those blowing agents that we talked about used in making both EPS and XPS. For decades and decades, they were using CFCs, chlorofluorocarbons. And then everyone's like, no, we can't use that stuff anymore. So we stopped using that stuff, and they switched over to hydrofluorocarbons. In this case, specifically, HFC-134 little a. but that stuff's awful too. Yeah, it's a really powerful greenhouse gas that traps heat 1430 times more efficiently than carbon dioxide.
36:35Man, that's a lot. They have they have other stuff that's way worse than that, but that's still not good, especially considering how much styrofoam is made every year. Right. Yeah, for sure. But so that's a problem with the extruded version. Apparently, the expanded version doesn't have nearly the same problem because it uses a different blowing agent. The best reason I could come up with, and this is all supposition, is that the extruded version keeps its blowing agent trapped into its structure. Okay, that makes sense. Yeah, that's why it uses a different one than the expanded one. The expanded one, when its blowing agent vaporizes, it creates, I guess, essentially pockets that get filled with air.
37:15So the blowing agent gets replaced with air. So they use a much less dangerous or potent greenhouse gas wise gas pentane. It's like 10 times more efficient at trapping heat than carbon dioxide. So, you know, big whoop. So the big problem as far as air pollution goes is with the expanded version, the styrofoam version. Yeah, for sure. You mentioned threats to marine life. That's a pretty obvious one because it's used so much out there. Buoys, again, and like any boogie board or kind of floaty thing that you're using. Floating docks that I mentioned a few times. Fish boxes that hold the fish that you catch when you're out at sea.
37:58Isn't that the same thing as that 1957 ice cooler? Yeah, sometimes. That's a good point. But the problem with all this stuff is that when a buoy is floating out there that's made of styrofoam or there's a floating dock, it's not going to stay pristine. You know, it's going to chip away and it's going to degrade and it's going to start to float away in little bitty pieces. Birds are coming along and eating that stuff when it's floating on top. It'll get heavier as it goes. It'll attract other organisms that make it, you know, not floatable. Right. And it will sink. And then all of a sudden it's eaten in the water and on the bottom of the seafloor by other marine animals.
38:36Yes. Yes. And the reason why it starts to break down, like say if it's part of your marina dock, is because it's exposed to sunlight. And UV radiation of different types break down polystyrene. Actually can break it down within a few years, as a matter of fact, when it's exposed to sunlight. The problem is, is a bunch of that stuff never gets exposed to sunlight. We throw it away and it gets buried in a landfill. Right. And there are plenty of other, you know, types of waste that are not great to throw into a landfill, but they're biodegradable. As far as we've known until very recently, styrofoam is not biodegradable.
39:17It's only chemically degradable. And it takes centuries for it to chemically degrade within a landfill. And because they're so big and bulky, even though they're very light, they're still usually in large shapes. Or they can be. They take up a lot of space in those landfills. So they take up a lot of space and they don't break down to free up space for, again, centuries. which someone pointed out, I believe, that essentially every piece of styrofoam that was ever made is still around in some shape or form on Earth. Yeah. And that's not the kind of like staying power that should inspire you. Right.
39:56Well, the thing, something that stuck out to me, Chuck, when you said earlier about how they're derived from petrol, petrochemicals, The fact that styrene is found in petroleum, petroleum is compressed ancient plant matter, right? Yeah. So that styrene that was originally in plants is still around millions and millions of years later in the petroleum that we're extracting from the ground. That just goes to show you the kind of staying power that thing has. Yeah. Wow. That's incredible. Yeah. Because of all these problems, of course, there's been many movements over the years to get rid of it. it depends on the state you live in probably or maybe even the community that you live in what kinds of bands have been put into place i think berkeley california no surprise and suffolk county new york oh again no surprise were the first communities in the 1980s to put a ban in place for this stuff yeah uh 14 different states have enacted uh bands on styrofoam um they don't always hold up because you've of course you've got these companies that are going to fight them tooth and nail, like you said, fight them in court.
41:02You've also got city governments that aren't necessarily going to enforce stuff too, right? Yeah, they tend to be very shy about getting sued, especially when their budgets are kind of tight, right? So if you're a big bad plastic company, apparently Dart Container is one of the more aggressive players in lobbying for Styrofoam to stick around. All you have to do is show up and be like, you know, we would hate to sue you guys into bankruptcy. It seems like a really nice town. And that city is going to be like, I don't even remember the styrofoam ban you're talking about. Yeah. Or we'd hate to close down these warehouses that employ people in your state.
41:38Right. Which is what they did in Maryland. Maryland banned the foam and the Dart Container Company shut down two warehouses there, employed close to 100 workers. And that is how they play that game. Yeah. They did it in California, too, in 2024. They put 175 of their workers out of work. And they always say, well, it's because of this ban. What I understand, these bans don't affect like warehousing or transportation of this stuff within the state or outside of the state. It just seems like it's a vindictive move. It probably helps our bottom line, I would imagine, in some way. I guess. I don't know.
42:17But from what I from what I understand, the aggressive lobbying that they engage in it. I don't know. It seems like I mean, they really want styrofoam. to stick around. And they're fighting a tougher and tougher battle each year now. Yeah, I think what I meant was I bet they're not financially hurting their company by shuttering these warehouses. No, I'm sure not. I'm sure not. I'm sure even if they do, it's negligible, you know, to punish a state into submission. There's also pressure campaigns. You know, McDonald's is one of the early ones in the 1980s. And I guess if they quit it in the 90s, it was kind of fully in the 80s when And people like human beings would, you know, protest or just sort of raise a ruckus over this stuff.
43:01And they got together and there were a few tries that like, hey, you shouldn't worry about it too much because we do it this way. We only use this much. They really want to hang on to him. But finally, like you mentioned, in 1990, they said, all right, we'll use paper. and, you know, you should be housing that cheeseburger the second it gets into your car anyway, right? Yeah, pretty much. I mean, just tell them to put it in your hands without even a paper wrapper. Yeah, I mean, I guess if you've got to get it and you can't eat it in your car and you have to carry it somewhere, it's not going to be as hot, but I don't know.
43:38I mean, housing fast food in the car is a rich tradition that needs to be upheld. For sure. Ever since there were cars and ever since there were fast food. Yeah. How else are you going to find, you know, three-year-old French fries under your car seat when you vacuum it? They look exactly the same as they did the day they got down there. They don't taste quite the same, but they do look like it, don't they? Yeah. So a lot of people say, OK, well, we got all this polystyrene and it does provide a lot of benefits, even though it seems like the health and environmental benefits are kind of racking up against it.
44:11Maybe there's something we can do to recycle it instead. And kind of at the outset, you were pointing out just how hard it is to recycle this stuff. And one reason why it's so hard is because these are big, oftentimes bulky items, especially when you put a bunch of stuff. I mean, you can attest if Emily's collecting this stuff. Oh, man, it's a nightmare. Yeah, it takes up a lot of space, even though it's all light. You could lift all of it with one hand, but it takes up a lot of space, right? So if you have a truck that is spending a bunch of money on gas to haul recyclables to a recycling center and then they get paid for that load in return, that styrofoam, I mean, they get paid by the pound.
44:51So that styrofoam takes up a whole truck, but it does not add up to a lot of money. So no one wants to haul this stuff. That's one problem. And that problem also belies a pro-styrofoam argument that you'll frequently run into. And that is that it has a small carbon footprint because it's so light. It takes so little gas and fuel of all kinds to transport it by ocean rail truck. The problem is, is you still have that bulky thing. So you actually are probably hiring more transportation to move styrofoam stuff because, yeah, it's light, but it takes up a lot of space in the truck. So I think that that's kind of a disingenuous argument in favor of styrofoam.
45:40I think you're probably right. Another problem with recycling it is a lot of the foams will have pigments in them. They might be colored or they may have flame retardants that make it not as or completely unrecyclable, along with food contamination. And then, like I mentioned at the beginning, just the cost of this. It's pretty cheap to make, so there's not a lot of incentives for company to try and recycle it. There's a little more promise in upcycling it by breaking it down into its various chemical constituents, some of which have some pretty high value. But as far as recycling, it just doesn't make a lot of cost-effective sense for a company or a recycling firm.
46:19Right. I was reading a JSTOR Daily article on this, and they profiled a company in Oregon called Agilix. And they upcycle styrofoam into petroleum again. They turn it back into crude oil, which can in turn be used for jet fuel and other really high-quality fuels. but that they're definitely not, they're in the minority as far as recycling companies go. Yeah, for sure. Another thing, if you're, you know, into helping the environment and recycling and stuff like that, don't, don't be fooled just because you see the little chasing arrows recycling symbol, because that is on so many things. You have to look at the number and then know what that number means.
47:04And, you know, you can look all that stuff up, but the ones and twos are generally, although not entirely consistently recycled, they have the best chance at being recycled. But something with the number six on it, it's probably not being recycled. No, that's polystyrene's number. And it, I mean, for all the reasons we just said, it, like you said, it's probably not being recycled. And apparently some environmentalists say that whole chasing arrows application for the plastics was basically made up by plastic companies to make you feel like, oh, okay, this thing can be recycled. I don't have to feel bad about using it for two minutes and then throwing it away.
47:45So there are, like I said, up until very recently, styrofoam was considered to be non-biodegradable. And there are not many things, including plastics, that are not biodegradable, right? They're starting to find that there are some microbes out there that have an ability to break it down. Apparently, they're found in the guts of mealworms, waxworms, some kinds of insect larva. And that these things will feed on styrofoam and they will break it down so thoroughly that you could actually eat these worms afterwards. It's just metabolized into harmless stuff. And even the solid waste they excrete, just keep it in the soil and eat food grown from the soil.
48:28The problem is, is this is a really new kind of revelation as far as I know. And it takes a lot of those things to break down styrofoam. And we're making way more styrofoam than these worms can possibly handle. Yeah, for sure. The size of that worm farm would be tremendously large. But you did find, I mean, boy, you texted me yesterday that something can actually melt styrofoam. I'm going to let you say what it is. But my question, my friend, is there an application for that? or is that just a factoid? It's just something you can do. Like if you, I hate packing peanuts. And so I've done this before with them, but it's a slog.
49:08So probably people aren't going to actually do it. But any organic solvent, and in particular acetone, that's the one I've always used, can dissolve styrofoam into basically nothing. You can take an entire beanbag chair worth of pellets and melt it all down into nothingness in a cup of acetone. It's really neat to see. Oh, just like very slowly adding it in? Yes. Yeah, yeah. Little by little. But it doesn't take very long for it to break down. It's not like instantly dissolving, but it's not, you know, days or anything like that either. And doesn't that create probably some awful thing? I mean, you don't want to chase that down out of the Solo Cup, right?
49:46No, I still have that mason jar of acetone with styrofoam in it because I have no idea what to do with it now. I think you just bury it in the backyard and forget about it. I'll just drop it off at a number six recycling center. Oh, great. You got anything else about styrofoam? I got nothing else. Try and avoid it if you can. Yeah. You know? Yeah. Since Chuck told you to avoid styrofoam, obviously, everybody, that means it's time for listener mail. That's right. I promised Billy Joel, and here we go, from Levi in Hangzhou, China, was giving me a little bit of a break when I bagged on one of my favorite performer songs.
50:27We Didn't Start the Fire. He said, Chuck, you're in good company because Billy Joel himself has called We Didn't Start the Fire the worst musical thing I've ever written, calling out the simplicity of its musical structure. Someone who has only recently gotten into his music but has personally ranked all of his 117 studio recordings. Wow, you went hard. I tend to agree. Fun song, but it doesn't hold a candle to the rest of the catalog. As for his best and favorite, he's cited Scenes from an Italian Restaurant. Great song. And You May Be Right. I know that one. Great song, Off of Glass Houses. Okay.
51:00As two of his favorites, and if Josh hasn't heard Miami 2017, the one you mentioned, make sure he starts with the live version from the Songs in the Attic album. Miles better than the studio version, in my opinion. Keep repping the piano man, and that is Levi in Hangzhou China. and he sent a link to the YouTube of the Howard Stern appearance where Billy Joel called that his worst musical outing. And he was like, the lyrics are fine. He said, I don't hate the song, but he just said musically, it's just very simplistic and not my best work. I mean, I think everybody can basically agree that. Yeah, but Mr.
51:37Joel, we wish you good health and recovery. You've got a lot of fans thinking about you and your family right now. Yeah, that's great, Chuck. I think that this Billy Joel saga should just continue. Every third, fourth, fifth listener mail should be about Billy Joel, I think. I hope so. And, you know, I didn't even mention the deep cut, so maybe we'll just surprise people here and there with those. Yeah, just pay them out slowly, man. Patience. Yeah. If you want to be like Levi and you're in China or anywhere else and want to get in touch with us about Billy Joel or anything else, you can send us an email to stuffpodcast at iheartradio.com.
52:15Stuff You Should Know is a production of iHeartRadio. For more podcasts from iHeartRadio, visit the iHeartRadio app. Apple Podcasts are wherever you listen to your favorite shows.
52:31Hey, it's Joel. And Matt. From HowToMoney. If your New Year's resolution is to finally get your finances in shape, we've got your back. Prices, they're still high. And the economy is all over the place. But 2026 is the year for you to get intentional and make real progress. That's right. Each week we break down what's happening with your money, the most important issues to focus on, and the small moves that make a big difference. Kick off the year with confidence. Listen to How to Money on the iHeartRadio app, Apple Podcasts, or wherever you get your podcasts. I'm John Polk. For years, I was the poster boy of the conversion therapy movement.
53:08the ex-gay who married an ex-lesbian and traveled the world telling my story of how I changed my sexuality from gay to straight. You might have heard my story, but you've never heard the real story. John has never been anything but gay, but he really tried hard not to be. Listen to Atonement, the John Palk story on the iHeartRadio app, Apple Podcasts, or wherever you get your podcasts. Hi, I'm Dr. Priyanka Wally. And I'm Hari Kondabolu. It's a new year. And on the podcast Health Stuff, we're resetting the way we talk about our health. Which means being honest about what we know, what we don't know, and how messy it can all be.
53:48I like to sleep in late and sleep early. Is there a chronotype for that or am I just depressed? Health Stuff is about learning, laughing, and feeling a little less alone. Listen on the iHeartRadio app, Apple Podcasts, or wherever you get your podcasts. This is an iHeart Podcast. Guaranteed Human.
From the publisher
All those to-go cups and food containers aren’t actually Styrofoam but those cups and Styrofoam are both forms of foam polystyrene, one of the rare materials that isn’t biodegradable. Which is a problem, because we make – and throw away – so much of it.
See omnystudio.com/listener for privacy information.
